Fork cap tool - Ducati Multistrada with Sachs forks

This is a Eurobike designed and produced tool, used to remove and tighten the fork cap on Ducati models fitted with Sachs forks. The caps on these forks feature a 10 sided decagon, 50 mm across the flats. Sockets and spanners designed for normal fasteners (hexagon) will not fit.

Precision made from 6 mm thick stainless steel this tool can accomodate the fork wiring harness through the 8 mm gap, so there is no need to disconnect the wiring to remove the fork cap.  Use with a 3/8" torque wrench tool or drive socket wrench (not included)

Internal Size: Decagon, 50.2 mm across flats
O.D.: 70 mm
Drive: 3/8" square with detent hole

Equivalent to OEM 88713.4303